MODEL  AR2235
Aluminum Reefer - 35 Gallon

22" diameter x 24" long,

Rolled aluminum cylinder, domed ends are die stamped with front head recessed to accept bolt on fuel gauge; metal is mill finish; fill assembly includes chain mounted non-vented screw on cap; three (3) 1/2" NPT top ports to accept the anti-spill vent, two (2) 1/2" x 1/4" pick up and return line tubes; rectangular bottom mounted sump includes shielded brass drain/check plug assembly.  Unit is packaged and ships by parcel service.  Unit meets all FHWA side mounted fuel tank requirements with permanent metal labeling welded to tank.  Units are designed for use of "Diesel Fuel Only".

MODEL  AR2250
Aluminum Reefer - 50 Gallon

22" diameter x 34" long,

Rolled aluminum cylinder, domed ends are die stamped with front head recessed to accept bolt on fuel gauge; metal is mill finish; fill assembly includes chain mounted non-vented screw on cap; three (3) 1/2" NPT top ports to accept the anti-spill vent, two (2) 1/2" x 1/4" pick up and return line tubes; rectangular bottom mounted sump includes shielded brass drain/check plug assembly.  Unit is packaged and ships by parcel service.  Unit meets all FHWA side mounted fuel tank requirements with permanent metal labeling welded to tank.  Units are designed for use of "Diesel Fuel Only"

MODEL  AR2275
Aluminum Reefer - 75 Gallon

22" diameter x 52" long,

Rolled aluminum cylinder, domed ends are die stamped with front head recessed to accept bolt on fuel gauge; metal is mill finish; fill assembly includes chain mounted non-vented screw on cap; three (3) 1/2" NPT top ports to accept the anti-spill vent, two (2) 1/2" x 1/4" pick up and return line tubes; rectangular bottom mounted sump includes shielded brass drain/check plug assembly.  Unit is packaged and ships by parcel service.  Unit meets all FHWA side mounted fuel tank requirements with permanent metal labeling welded to tank.  Units are designed for use of "Diesel Fuel Only".

MODEL  AR22100
Aluminum Reefer - 100 Gallon

22" diameter x 62" long,

Rolled aluminum cylinder, domed ends are die stamped with front head recessed to accept bolt on fuel gauge; metal is mill finish; fill assembly includes chain mounted non-vented screw on cap; three (3) 1/2" NPT top ports to accept the anti-spill vent, two (2) 1/2" x 1/4" pick up and return line tubes; rectangular bottom mounted sump includes shielded brass drain/check plug assembly.  Unit is packaged and ships by parcel service.  Unit meets all FHWA side mounted fuel tank requirements with permanent metal labeling welded to tank.  Units are designed for use of "Diesel Fuel Only".